IsoHiTech supplies aftermarket-compatible lubrication components. Brand names such as Lincoln, SKF, Graco, Bijur, Dropsa, Alemite and LockNLube are used for compatibility reference only; IsoHiTech is not an authorized OEM dealer.
Grease Pump HS Code
When importing or exporting grease pumps, customs authorities classify the product using a Harmonized System (HS) code. The correct grease pump HS code depends on the pump type, power source, and intended use. This guide covers the most common classifications for industrial grease pumps and related lubrication equipment.
Common HS Codes for Grease Pumps
| Product | Common HS Code | Notes |
|---|---|---|
| Pneumatic grease pump | 8413.50 | Positive-displacement pump, hand- or power-operated; confirm subheading by air motor type |
| Electric grease pump | 8413.50 | Often classified under reciprocating positive-displacement pumps |
| Manual hand grease pump | 8413.20 | Hand-operated pumps for liquids or lubricants |
| Grease pump kit with hose and gun | 8413.50 | Classified by the pump; accessories may be reported separately under their own codes |
| Grease fitting / Zerk fitting | 8481.90 | Valves, taps, cocks and similar appliances |
| High-pressure grease hose | 4009.21 / 4009.22 | Rubber or plastic hose reinforced for high pressure |
| Lubrication fittings and adapters | 8481.90 / 7307.99 | Depends on material and function; brass or steel tube fittings |
How to Confirm the Right Code
HS codes are determined by the importing country’s customs authority based on the product’s material, function, and technical specifications. Always verify the final code with the freight forwarder or customs broker before shipping. Provide them with:
- Pump type: pneumatic, electric, or manual
- Pressure ratio and maximum outlet pressure
- Power rating (for electric pumps) or air consumption (for pneumatic pumps)
- Whether the unit is shipped as a pump only or a complete kit
Documents Usually Required
- Commercial invoice with HS code and product description
- Packing list with net and gross weights
- Certificate of origin (if required by the destination country)
- Material test reports or mill certificates for pressure-bearing steel parts
Complete HS Code Reference for Grease Pumps and Accessories
The table below lists the HS chapters most often used when shipping grease pumps, their kits, and related accessories. The first six digits are harmonized internationally; the final digits vary by country.
| Product | HS Code (6-digit) | Notes |
|---|---|---|
| Pneumatic or electric grease pump | 8413.50 | Positive-displacement pump; confirm reciprocating or rotary subheading |
| Manual hand grease pump | 8413.20 | Hand-operated pump for liquids or lubricants |
| Pump parts (casings, plungers, seals) | 8413.91 | Parts suitable for use solely or principally with pumps of heading 8413 |
| Air motor for pneumatic grease pump | 8412.39 | Other engines and motors; confirm by power rating |
| Electric motor for grease pump | 8501.51 / 8501.52 | AC or DC motor; depends on voltage and output |
| Grease fitting / Zerk fitting | 8481.90 | Taps, cocks, valves and similar appliances |
| Steel or brass tube fitting | 7307.99 / 7412.10 | Depends on material; iron/steel or copper alloy |
| High-pressure rubber hose | 4009.21 / 4009.22 | Reinforced rubber hose |
| High-pressure plastic hose | 3917.31 / 3917.32 | Plastic tube reinforced for pressure |
| Steel-reinforced nylon lubrication tube | 3917.39 | Other tubes of plastics |
When a complete kit is shipped, customs may classify the entire consignment under the pump HS code if the pump is the principal item. Alternatively, they may require each line item to be declared separately. Check with the broker before shipping.
India GST and HSN Code for Grease Pumps
For shipments to India, grease pumps are usually classified under HSN Chapter 8413 (Pumps for Liquids). The GST rate is typically 18%, but the correct HSN code and tax rate should be confirmed with the consignee’s chartered accountant or customs broker because classification can vary by pump design and power source.
| Product | Common HSN Code | Typical GST Rate |
|---|---|---|
| Pneumatic grease pump | 8413.50 | 18% |
| Electric grease pump | 8413.50 | 18% |
| Manual grease pump | 8413.20 | 18% |
| Grease fittings | 8481.90 | 18% |
| High-pressure hose | 4009.21 / 4009.22 | 18% |
GST is levied on the assessable value, which includes the product cost, freight, insurance, and any other charges paid before the goods reach India. Always request a final classification ruling from Indian customs if the shipment value is high or the pump design is unusual.
Frequently Asked Questions
Is the HS code the same in every country?
The first six digits are harmonized internationally. Countries may add two to four additional digits for local classification, so the full code can vary by destination.
Do grease pumps and oil pumps share the same HS code?
Often yes, because both are classified as pumps for liquids. The specific subheading depends on design (reciprocating, rotary, centrifugal) and power source.
What if a shipment includes grease, fittings, and a pump?
Each item may need its own HS code. Mixed shipments are usually itemized on the commercial invoice with a code per line.
What is the HS code for a grease pump in India?
In India, grease pumps are usually classified under HSN 8413.50 for pneumatic or electric positive-displacement pumps, or 8413.20 for hand-operated pumps. The typical GST rate is 18%. Final classification should be confirmed with the consignee's chartered accountant or customs broker because it depends on the exact pump design and power source.
Do grease pump accessories need separate HS codes?
Yes. Fittings, hoses, motors, and grease are often classified separately. For example, grease fittings may fall under 8481.90, high-pressure hose under 4009.21 or 4009.22, and electric motors under 8501.51 or 8501.52. If the accessories are shipped as part of a complete kit, customs may classify the whole shipment under the principal item, but itemized declarations are usually safer.
Documentation Assistance
IsoHiTech provides commercial invoices, packing lists, and product specifications for every export shipment. If a specific HS code confirmation or additional certificates are needed, contact the IsoHiTech sales team with the destination country and product model.
Browse the grease pump category or visit the grease pump hub for product details.
n
