LUBE LHL Pump Alternatives
LUBE Corporation of Japan builds the LHL family of compact cartridge grease pumps, and this page covers aftermarket replacements. The four models below share one platform and differ mainly in pressure rating, so this page decodes the family once instead of repeating a separate listing for each number. Read about central lubrication systems to see how these pumps fit a larger scheme at this introduction.
The Four Models
- P-102: 5 MPa
- P-107: 5 MPa
- P-202: 8 MPa
- P-207: 8 MPa
All four models share a DC 24 V motor and a discharge of 7 ml/min.
Shared Specifications
- DC 24 V motor
- 7 ml/min discharge
- Continuous energization permitted
- At least 10 s between runs
- Wiring by terminals, not a connector
- IP54 enclosure rating
- Flame-retardant UL94-V0 body
- Feed switch optional
- Grease-level switch provided as standard
Cartridges and Grease
The LHL-X100 cartridge is listed for all four models, and LHL-W100 is additionally listed for the P-207 only. Replace the cartridge when the grease-level switch signals low rather than waiting for the line to starve. Store cartridges sealed so the grease does not pick up dirt or moisture before installation. Do not mix different thickener types, and if the machine specifies a molybdenum disulfide fortified grease, confirm suitability at quotation.
Catalog Contradictions
The Japanese document lists power consumption at 28.8 W, while the English document lists 24 W. The Japanese document gives the P-107 and P-207 weight as 1.3 kg, but the English document gives 1.6 kg; the P-102 and P-202 weigh 1.2 kg in both documents. These splits come from the maker’s own documents, so neither figure is wrong on this page; they simply disagree. Confirm from the current data sheet at quotation.
Where It Fits and Ordering
These compact cartridge pumps feed a single line in small machines, and you can review single line lubrication system for context. Compare with the larger sibling pump, the LUBE MMXL III automatic intermittent lubrication pump. Match the pressure class to your line length before choosing between the 5 MPa and 8 MPa pairs. State your cartridge type and any feed switch need at quotation so the build matches your machine. For ordering assistance, contact the quotation team.
Frequently Asked Questions
What motor voltage do all models use?
All four models use a DC 24 V motor. Discharge is 7 ml/min for every model in this family.
Which models have an 8 MPa pressure rating?
P-202 and P-207 carry an 8 MPa rating. P-102 and P-107 carry a 5 MPa rating.
Can the pump run continuously?
Continuous energization is permitted for these pumps. Leave at least 10 seconds between runs as an interval.
How is the pump wired?
Wiring is by terminals, not a connector. The enclosure rating is IP54 for all models.
Is the feed switch standard?
No, the feed switch is optional, not standard. A grease-level switch is provided as standard.
What is the body material rating?
The body material is flame-retardant to UL94-V0. This applies to all four models.
Which cartridges fit these pumps?
The LHL-X100 cartridge is listed for all four models. LHL-W100 is additionally listed for the P-207 only.
Can I mix grease thickener types?
No, do not mix different thickener types in any cartridge. If the machine specifies a molybdenum disulfide fortified grease, confirm suitability at quotation.
What should I check in the catalogs?
The Japanese and English documents disagree on power consumption and some weights. Confirm the current data sheet at quotation.
Who builds and supports these units?
IsoHiTech Lubrication Systems, founded in 2023, engineering since 2006, builds and supports every unit. Email inquiry@isohitech.com for specifications and a quotation.
For ordering assistance, contact the quotation team. LUBE is a trademark of LUBE Co., Ltd. This page covers aftermarket replacement pumps, not manufactured, sponsored, or endorsed by LUBE Co., Ltd. LHL, P-102, P-107, P-202, P-207, LHL-X100, and LHL-W100 are LUBE designations shown for cross-reference identification only.
