Lincoln 304-19509-1 M10x1 Adapter
The Lincoln 304-19509-1 is a male-to-female M10x1 thread extension used in lubrication installations. The reference is shown for cross-reference identification in distributor listings and parts systems. This adapter moves an M10x1 connection outward from a port without changing the thread size. For background on how such fittings participate in a system, see the lubrication system connections guide.
Listed Specifications and Their Source
- M10x1 male to M10x1 female
- Zinc-plated steel
- Approximately 18 mm length
- 13 mm hex
- 350 bar per distributor listings
These values come from distributor listings, and inclusion in an official public SKF Lincoln catalog was not independently confirmed. Request the current catalog sheet with the quotation before relying on any single listed value.
What an M10x1 Extension Does
The male end screws into an M10x1 female port on a manifold, divider, pump outlet, or similar threaded port. The female end accepts an M10x1 male fitting or line stud, moving the connection outward from the port. Common use cases include clearing a manifold face, adding wrench clearance, and spacing a line stud away from the block.
What It Does Not Do
This adapter carries no metering function and does not control flow. It is not a thread conversion fitting and does not change thread size. Do not use it to join different thread families or to adapt between metric and inch connections.
Where It Fits
M10x1 is the standard outlet thread on SKF progressive metering devices, so this adapter commonly extends connections at progressive distributor outlets. See the SSV progressive distributor page for related outlet details. Other thread families exist in lubrication work, for example the 5/16-24 UNF compression bushings used in Bijur Delimon tubing systems, shown on the 5/16-24 UNF compression bushing page. This is an aftermarket adapter, not manufactured, sponsored, or endorsed by Lincoln. Contact us for a current quotation and catalog sheet.
Ordering Practice
Confirm both sides of the connection are M10x1 with a thread pitch gauge before ordering. Confirm installed length against available clearance at the port and surrounding components. Verify the pressure requirement against the listing and the quotation. Order the catalog sheet with the quotation so the listed values can be checked against the current supplier data.
Frequently Asked Questions
What is the Lincoln 304-19509-1?
It is an M10x1 male to M10x1 female adapter. It functions as a thread extension for lubrication connections.
What material is it?
The material is zinc-plated steel according to the distributor listings. Confirm the finish and material with the quotation.
How long is it?
The listed length is approximately 18 mm. It has a 13 mm hex for installation.
What pressure do listings show?
Distributor listings show 350 bar for this part. Confirm the pressure rating with the quotation before ordering.
Can it be verified in an official catalog?
Not from public SKF Lincoln catalog pages. The specifications come from distributor listings.
What does it do?
It extends an M10x1 connection outward from a port. This adds clearance for fittings or tools.
Does it convert threads?
No, both ends are M10x1. It does not change thread size.
Does it meter lubricant?
No, it only extends the connection. Metering happens in metering devices.
Where is M10x1 used?
M10x1 is the standard outlet thread on SKF progressive metering devices. This adapter commonly extends connections at those outlets.
Who builds and supports this unit?
IsoHiTech Lubrication Systems, founded in 2023, engineering since 2006, builds and supports every unit. Email inquiry@isohitech.com for specifications and a quotation.
Lincoln is a trademark of its respective owner. This is an aftermarket adapter, not manufactured, sponsored, or endorsed by Lincoln. 304-19509-1 is a Lincoln designation shown for cross-reference identification only. Contact us for a quotation.
